Floating Staircase Builders
Cantilevered Treads Into Masonry
Individual treads or steel tread bars anchored directly into a solid masonry wall, giving the purest floating look.

What's involved
A true cantilever stair has each tread fixed individually into the wall with no visible support at all. The fixings are steel bars or plates resin-anchored deep into solid brick, block or concrete, or built into a new wall as it goes up. This only works where the wall is strong enough, typically solid masonry at least 215 mm thick, and an engineer must confirm the design. Treads are often thicker, around 80 to 100 mm, to hide the steel bar inside. Each tread is drilled, the wall is cored, resin injected and the tread set level. This approach takes longer, around three to five days. You need a structural survey of the wall early, as many internal walls in modern homes are too thin.
How we handle it
Share your project
Use the quote form to tell us your floor-to-floor height, the current stair layout and the floating style you like. Photos of the hallway and stairs help us match you with the right specialist.
Survey and concept
A stair specialist surveys the opening and walls, discusses tread materials and balustrades, and gives you a fixed price for design, fabrication and installation.
Engineering and approval
Drawings and structural calculations are produced and submitted to Building Control, or for a building warrant in Scotland, before fabrication begins.
Fabrication
Steelwork is made and powder coated off site, timber treads are machined and finished, and glass is toughened to measured sizes. Lead times are typically four to eight weeks.
Installation and sign-off
The old stair is removed, steel is fixed, treads are fitted and balustrades installed. Building Control inspects and the stair is handed over ready for use.
Price guide
Floating staircase prices depend on the structure used, the number of treads, the tread material and the balustrade. A straight concealed-stringer stair with oak treads costs much less than a curved spine stair with stone treads. Design, engineering and Building Control fees are included in a fixed quote after survey.
- Central spine staircase: £9,000–£18,000. Powder-coated steel spine with timber treads, including engineering and installation.
- Straight concealed-stringer stair, oak treads: £6,500–£12,000. Typical 13-tread domestic stair, steel stringer, solid oak treads and plastering of the wall.
- Old staircase removal and preparation: £600–£2,000. Stripping out the existing stair and preparing walls, joists and floor for the new structure.
Questions about cantilevered treads into masonry
What wood is best for floating stair treads?
Solid oak is the most popular choice because it is hard, stable and takes oil or lacquer well. Ash is pale and similarly tough. Walnut gives a darker, premium look at higher cost. Treads are usually 60 to 100 mm thick so the steel fixings can be hidden inside and the stair feels solid underfoot.
Other services
Concealed Stringer Floating Stairs
Treads welded or bolted to a hidden steel stringer fixed to the wall, then plastered over so the treads appear to float.
Central Spine Staircases
A single steel spine beam runs under the centre of the treads, giving a sculptural look that can stand away from walls.
Glass Balustrades and Handrails
Frameless toughened glass balustrades, steel posts or minimal handrails fitted to meet guarding requirements on open-sided stairs.
Stair Design and Building Control
Survey, drawings, structural calculations and liaison with Building Control so the floating stair is safe and fully compliant.
Staircase Replacement and Removal
Removing an old enclosed staircase, making good the opening and preparing walls and floors for a new floating stair.
Cantilevered Treads Into Masonry near you
Get a free floating staircase builders quote
Tell us what you need and we'll come back with a clear price.
Request a quote