Floating Staircase Builders

Nationwide · England, Scotland & Wales

Floating Staircase Builders across the UK

Cantilevered and floating staircases designed and built to Part K.

In short

Floating Staircase Builders is a UK service that designs, fabricates and installs floating staircases, where treads appear to project from the wall with no visible stringer or risers. They are supported by a hidden steel spine, concealed steel stringer or treads anchored into a structural wall, and are built to Building Regulations by vetted, insured specialists.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Floating Staircase Builders quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

A floating staircase looks simple because all the engineering is hidden. Each tread seems to hang off the wall, with open space beneath and often a frameless glass balustrade beside it. Behind that look is either a steel stringer bolted to the wall and buried in plaster, a central spine beam, or treads fixed into a wall built to take the load. The wall has to be strong enough, the steel has to be fabricated to the millimetre, and the stair must still meet Part K rules on rise, going, headroom and guarding.

We arrange floating staircases through a network of vetted, insured stair specialists, steel fabricators and joiners across the UK. They survey the opening, check whether the wall can take a cantilever, produce drawings with engineer's calculations where needed, and work with Building Control. Treads come in solid oak, walnut, ash, stone or steel. Tell us your floor-to-floor height, the opening size and the style you want, and we will come back with a clear price.

How it works

  1. Share your project

    Use the quote form to tell us your floor-to-floor height, the current stair layout and the floating style you like. Photos of the hallway and stairs help us match you with the right specialist.

  2. Survey and concept

    A stair specialist surveys the opening and walls, discusses tread materials and balustrades, and gives you a fixed price for design, fabrication and installation.

  3. Engineering and approval

    Drawings and structural calculations are produced and submitted to Building Control, or for a building warrant in Scotland, before fabrication begins.

  4. Fabrication

    Steelwork is made and powder coated off site, timber treads are machined and finished, and glass is toughened to measured sizes. Lead times are typically four to eight weeks.

  5. Installation and sign-off

    The old stair is removed, steel is fixed, treads are fitted and balustrades installed. Building Control inspects and the stair is handed over ready for use.

Floating Staircase Builders prices

Floating staircase prices depend on the structure used, the number of treads, the tread material and the balustrade. A straight concealed-stringer stair with oak treads costs much less than a curved spine stair with stone treads. Design, engineering and Building Control fees are included in a fixed quote after survey.

JobGuide priceNotes
Straight concealed-stringer stair, oak treads£6,500–£12,000Typical 13-tread domestic stair, steel stringer, solid oak treads and plastering of the wall.
Central spine staircase£9,000–£18,000Powder-coated steel spine with timber treads, including engineering and installation.
Cantilevered treads into masonry£8,000–£16,000Resin-anchored individual treads into a suitable solid wall, engineer's design included.
Frameless glass balustrade£1,800–£4,500Toughened glass panels in a base channel or clamps along the open side and landing.
Design, calculations and Building Control£900–£2,500Survey, drawings, structural calculations and application fees, usually built into the overall quote.
Old staircase removal and preparation£600–£2,000Stripping out the existing stair and preparing walls, joists and floor for the new structure.

What affects the price →

Who we work for

Homeowners renovating

People replacing a dated enclosed staircase to open up the hallway and let light through, often as the centrepiece of a wider renovation or extension.

Self-builders

Those building a new home who can design the supporting wall or slab around a floating stair from the start, which simplifies the engineering.

Architects and designers

Professionals specifying a floating stair for a client who need a specialist to develop the detail, produce calculations and deliver the installation.

Property developers

Developers of high-end conversions and new builds who want a feature staircase that lifts the perceived value of each home.

Barn and loft conversions

Owners converting barns, warehouses or lofts where open, minimal stairs suit the space and maintain views through the building.

Rules and standards that apply

  • Approved Document K of the Building Regulations sets limits for private stairs in England, including a maximum rise of 220 mm, a minimum going of 220 mm and a maximum pitch of 42 degrees.
  • Under Approved Document K, open risers must be constructed so a 100 mm sphere cannot pass through the gap, and treads should overlap each other by at least 16 mm.
  • Guarding on private stairs must be at least 900 mm high measured from the pitch line, and must not allow a 100 mm sphere to pass through any opening.
  • Headroom over a stair should be at least 2 metres under Approved Document K, with a reduced allowance of 1.9 metres at the centre line permitted for loft conversions.
  • In Scotland, stair design is governed by the Scottish Building Standards, and a building warrant from the local authority is usually required before a new or altered staircase is installed.

How to choose the right floating staircase builders company

  • Ask to see completed floating stairs and whether the steel was designed by a structural engineer.
  • Check the quote includes Building Control or building warrant fees and the engineer's calculations.
  • Confirm how the wall will be assessed and what happens if it is not strong enough for the design.
  • Ask what the tread timber is, its thickness and how it is finished against wear and movement.
  • Make sure glass balustrades are toughened or laminated safety glass and fitted to the correct height.
  • Get a programme showing survey, approval, fabrication lead time and the days you will be without stairs.

Frequently asked questions

What is a floating staircase?

A floating staircase is a stair where the treads appear to hang in the air with no visible stringer or risers. The support is hidden, usually a steel stringer concealed in the wall, a central steel spine or treads anchored into solid masonry. They are popular for opening up hallways and letting light pass through.

How much does a floating staircase cost in the UK?

A straight floating staircase with a concealed steel stringer and oak treads typically costs £6,500 to £12,000 installed. Central spine designs are usually £9,000 to £18,000. Glass balustrades add £1,800 to £4,500. Curved stairs, stone treads or major structural alterations can push costs above £20,000.

Do floating stairs meet UK Building Regulations?

Yes, floating stairs can fully meet Building Regulations if designed correctly. They must follow Part K rules on rise, going, pitch, headroom and guarding, including the 100 mm sphere rule for open risers. Structural calculations show the steel and fixings can carry the loads, and Building Control inspects the finished stair.

Can you have a floating staircase on a stud wall?

Not directly. A standard timber stud wall cannot support cantilevered treads. The wall is either rebuilt in block, reinforced with steel posts, or a concealed steel stringer is designed to carry the load to the floor and upper structure. A central spine stair avoids the need for a structural wall altogether.

Are floating stairs safe for children?

Floating stairs can be made child-friendly, but open risers and open sides need care. Gaps between treads must not allow a 100 mm sphere through, which may mean adding riser bars or thicker treads. A glass balustrade on the open side stops falls. Some families add a stair gate fixed to a wall-mounted bracket.

How long does it take to install a floating staircase?

Installation on site usually takes two to five days, depending on the design. Before that, survey, design and Building Control approval take two to six weeks, and fabrication of steel, treads and glass takes four to eight weeks. Plan for around two to three months from first survey to finished stair.

Do I need Building Control for a new staircase?

In most cases, yes. Replacing a staircase is building work that must comply with Part K, and structural changes or moving the stair opening need approval. Your installer or designer usually submits the application. In Scotland, a building warrant is normally required before work starts.

What wood is best for floating stair treads?

Solid oak is the most popular choice because it is hard, stable and takes oil or lacquer well. Ash is pale and similarly tough. Walnut gives a darker, premium look at higher cost. Treads are usually 60 to 100 mm thick so the steel fixings can be hidden inside and the stair feels solid underfoot.

See all FAQs →

Get a free floating staircase builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote