Floating Staircase Builders

Guide · Homeowners · 4 min read · Updated 17 November 2026

How Much Does a Floating Staircase Cost in the UK?

Short answer

A straight floating staircase with a concealed steel stringer and oak treads typically costs £6,500–£12,000 in the UK. Central spine staircases run £9,000–£18,000, and cantilevered treads anchored into masonry £8,000–£16,000. Add £1,800–£4,500 for a frameless glass balustrade, £900–£2,500 for design, calculations and Building Control, and £600–£2,000 to remove the old stair.

How Much Does a Floating Staircase Cost in the UK?

Floating staircase prices at a glance

A floating staircase looks simple, but that simplicity is engineered. Each tread has to carry people safely while appearing to have no support, so the hidden structure, usually steel, does all the work. The cost reflects design and structural calculations, steel fabrication, timber or stone treads, the balustrade, Building Control, and the labour to remove the old stair and make good the walls, floors and ceilings around it.

The figures below are typical for a domestic stair of around 13 treads in 2026. They vary with tread material, finish, the shape of the stair and how much building work is needed around it.

ItemTypical priceWhat it usually includes
Straight concealed-stringer stair, oak treads£6,500–£12,000Typical 13-tread stair, steel stringer, solid oak treads, plastering of the wall
Central spine staircase£9,000–£18,000Powder-coated steel spine, timber treads, engineering and installation
Cantilevered treads into masonry£8,000–£16,000Resin-anchored individual treads into a suitable solid wall, engineer's design
Frameless glass balustrade£1,800–£4,500Toughened glass in a base channel or clamps along the open side and landing
Design, calculations and Building Control£900–£2,500Survey, drawings, structural calculations and application fees
Old staircase removal and preparation£600–£2,000Stripping out the old stair, preparing walls, joists and floor

What drives the price

The support system is the biggest factor. A concealed stringer, a steel beam fixed along the wall with tread supports welded or bolted to it, is the most common and usually the most affordable option. A central spine is a fabricated steel beam that runs under the middle of the treads; it is a feature in its own right and needs more engineering and fabrication. Cantilevered treads anchored directly into masonry give the purest look but depend on the wall, and the engineer's design and resin anchoring add cost.

Shape matters too. A straight flight is the simplest. Quarter-turn and half-turn stairs with winders or landings need more complex steelwork, more site measurement and often a second fabrication stage. Treads in thick solid oak, walnut or stone cost more than veneered or thinner timber options, and stone treads also add weight the structure must carry.

  • Type of hidden structure: stringer, spine or cantilever
  • Straight flight versus turns, winders or landings
  • Tread material, thickness and finish
  • Balustrade type: glass, steel rods or a wall-side handrail only
  • Structural work to walls, joists or the floor
  • Plastering, decorating and making good after installation

Costs people forget to budget for

Removing an enclosed staircase changes the room. The old stair often had a cupboard underneath and a stud wall along its side; when these go, the walls, floor and ceiling around the stairwell need patching and decorating. Radiators, sockets and light switches on the old stair wall may need moving. If the new stair needs a larger opening in the floor above, trimming the joists is structural work and adds to the engineer's and builder's time.

Building Control fees are another line, whether through the council or a registered building control approver. Most installers include them in the design package, but check. Finally, timber treads need finishing, either in the workshop with a hard-wearing oil or lacquer, or on site once installed, and that affects both cost and timing.

Where you can save money

A straight concealed-stringer stair against a sound masonry wall, with oak treads and a single wall-side handrail plus a simple steel or glass balustrade on the open side, gives the floating look at the lower end of the price range. Keeping the existing stairwell opening, rather than enlarging it, avoids structural alterations to the floor above.

Choosing standard tread thicknesses and finishes the fabricator already uses, rather than bespoke profiles, also helps. If you are renovating the whole house, installing the stair at the same stage as plastering and flooring, rather than as a separate project later, keeps the making-good costs down.

Be wary of savings that cut corners on design. A cheaper quote that leaves out engineering or Building Control is not a saving, because an unapproved stair can cause problems when you sell and may need altering or replacing.

Timescales

Expect several weeks from survey to installation. Design and structural calculations usually come first, followed by Building Control approval or notice. Steel fabrication typically takes two to six weeks depending on the fabricator, and timber treads are made in parallel. On site, removing the old stair and fixing the new structure usually takes several days, followed by plastering over any concealed stringer, fitting treads and balustrades, and final inspection. A temporary stair or ladder may be needed during the changeover, so plan for the upstairs being awkward to reach for a short period.

Lead times also depend on the season and on how busy fabricators are, so it helps to start the design process well before the date you want the stair in place, especially if it is tied to a wider renovation.

What a good quote covers

A good quote breaks down design, engineering, Building Control, steelwork, treads, balustrade, removal of the old stair and making good. It should state the tread material and finish, the balustrade type and height, and who is responsible for plastering and decorating. Ask how the design meets Approved Document K, or the Scottish Building Standards if you are in Scotland. We arrange floating staircases through vetted, insured specialists who handle design, fabrication and installation under one price.

Questions people also ask

Are floating stairs more expensive than normal stairs?

Yes, usually several times the cost of a standard timber staircase. A conventional softwood stair can be bought and fitted for a fraction of the price because it uses visible stringers and risers. Floating stairs need structural steel, engineering, Building Control and a higher standard of finishing to hide the support.

Do floating stairs add value to a house?

They can make a strong first impression and suit modern and open-plan homes, but value depends on the buyer. In family homes, some buyers worry about open risers and children. A design that meets Building Regulations, with proper guarding, is more reassuring to buyers than one that looks dramatic but feels exposed.

How long does a floating staircase take to install?

On site, typically several days, plus time for plastering and finishing. The longer part is before installation: design, structural calculations, Building Control and steel fabrication often take several weeks in total. Your installer should give you a programme covering each stage.

Written and checked by the Floating Staircase Builders team. Read our editorial policy.

Get a free floating staircase builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote