Floating Staircase Builders
Stair Design and Building Control
Survey, drawings, structural calculations and liaison with Building Control so the floating stair is safe and fully compliant.

What's involved
A floating staircase almost always needs structural input. The designer takes a laser survey of the opening, floor-to-floor height and walls, then sets out a stair that meets Part K: a maximum rise of 220 mm, minimum going of 220 mm and a pitch no steeper than 42 degrees on private stairs, with at least 2 metres headroom. Open risers must not allow a 100 mm sphere through and treads should overlap by at least 16 mm. A structural engineer calculates the steel sizes and fixings. Drawings go to Building Control, or a building warrant application in Scotland, before work begins. This stage takes two to six weeks. You need to provide access for the survey and any existing plans.
How we handle it
Share your project
Use the quote form to tell us your floor-to-floor height, the current stair layout and the floating style you like. Photos of the hallway and stairs help us match you with the right specialist.
Survey and concept
A stair specialist surveys the opening and walls, discusses tread materials and balustrades, and gives you a fixed price for design, fabrication and installation.
Engineering and approval
Drawings and structural calculations are produced and submitted to Building Control, or for a building warrant in Scotland, before fabrication begins.
Fabrication
Steelwork is made and powder coated off site, timber treads are machined and finished, and glass is toughened to measured sizes. Lead times are typically four to eight weeks.
Installation and sign-off
The old stair is removed, steel is fixed, treads are fitted and balustrades installed. Building Control inspects and the stair is handed over ready for use.
Price guide
Floating staircase prices depend on the structure used, the number of treads, the tread material and the balustrade. A straight concealed-stringer stair with oak treads costs much less than a curved spine stair with stone treads. Design, engineering and Building Control fees are included in a fixed quote after survey.
- Frameless glass balustrade: £1,800–£4,500. Toughened glass panels in a base channel or clamps along the open side and landing.
- Cantilevered treads into masonry: £8,000–£16,000. Resin-anchored individual treads into a suitable solid wall, engineer's design included.
- Central spine staircase: £9,000–£18,000. Powder-coated steel spine with timber treads, including engineering and installation.
Questions about stair design and building control
What is a floating staircase?
A floating staircase is a stair where the treads appear to hang in the air with no visible stringer or risers. The support is hidden, usually a steel stringer concealed in the wall, a central steel spine or treads anchored into solid masonry. They are popular for opening up hallways and letting light pass through.
How much does a floating staircase cost in the UK?
A straight floating staircase with a concealed steel stringer and oak treads typically costs £6,500 to £12,000 installed. Central spine designs are usually £9,000 to £18,000. Glass balustrades add £1,800 to £4,500. Curved stairs, stone treads or major structural alterations can push costs above £20,000.
Do floating stairs meet UK Building Regulations?
Yes, floating stairs can fully meet Building Regulations if designed correctly. They must follow Part K rules on rise, going, pitch, headroom and guarding, including the 100 mm sphere rule for open risers. Structural calculations show the steel and fixings can carry the loads, and Building Control inspects the finished stair.
Other services
Concealed Stringer Floating Stairs
Treads welded or bolted to a hidden steel stringer fixed to the wall, then plastered over so the treads appear to float.
Central Spine Staircases
A single steel spine beam runs under the centre of the treads, giving a sculptural look that can stand away from walls.
Cantilevered Treads Into Masonry
Individual treads or steel tread bars anchored directly into a solid masonry wall, giving the purest floating look.
Glass Balustrades and Handrails
Frameless toughened glass balustrades, steel posts or minimal handrails fitted to meet guarding requirements on open-sided stairs.
Staircase Replacement and Removal
Removing an old enclosed staircase, making good the opening and preparing walls and floors for a new floating stair.
Stair Design and Building Control near you
Get a free floating staircase builders quote
Tell us what you need and we'll come back with a clear price.
Request a quote