Floating Staircase Builders

Guide · Homeowners · 3 min read · Updated 17 November 2026

Floating Staircase Installation: What Happens, Step by Step

Short answer

A floating staircase project runs through survey, design and structural calculations, Building Control approval, steel and tread fabrication, removal of the old stair, fixing the steel structure, plastering, fitting treads and balustrade, then final inspection. On-site work usually takes several days, but the whole process from survey to completion commonly takes several weeks to a few months.

Floating Staircase Installation: What Happens, Step by Step

Survey and design

The project starts with a site survey. The designer measures floor-to-floor height, the stairwell opening, the wall and the floor at the bottom, and checks the wall construction. From this, they work out the number of treads, the rise and going of each step and the pitch, so the stair meets Approved Document K, or the Scottish Building Standards in Scotland. You choose the support type, tread material, finish and balustrade.

An engineer then designs the structure and produces calculations. Drawings show every dimension, so you can see exactly how the stair will look and how it fits the room.

Building Control and fabrication

The drawings and calculations go to Building Control for approval, either through the council or a registered building control approver. In Scotland, a building warrant is usually needed before work starts. Once approved, the steel is fabricated, typically over two to six weeks, and treads are machined and finished in a workshop. Precise fabrication matters because the steel will be hidden, or on show in a spine stair, and treads need to fit exactly.

Ask for a programme showing when the fabrication will be ready, so you can plan around the period when your stairs are out of action.

StageTypical durationWho is involved
Survey and designOne to three weeksDesigner, engineer
Building Control approvalA few weeksCouncil or registered building control approver
Steel and tread fabricationTwo to six weeksFabricator, joiner
Old stair removalOne to two daysInstallation team
Steel installation and plasteringTwo to four daysInstallers, plasterer
Treads, balustrade and inspectionOne to three daysInstallers, Building Control

Removing the old staircase

On installation day, the old stair is stripped out. Stringers, treads, risers, balustrades and any cupboard underneath come out, and the walls and floor are prepared. Where the stair is the only route upstairs, the installer will arrange temporary access, often a secure ladder or temporary stair, and agree with you how the household will manage. Dust sheets and screens protect the rest of the home.

If the stairwell opening needs changing, the builder trims joists to the engineer's design. Any services in the stair wall, such as sockets or pipes, are moved.

  • Agree temporary upstairs access before the day
  • Clear the hallway and under-stair space
  • Protect floors and furniture nearby
  • Plan for some dust and noise
  • Move sockets and services off the stair wall if needed

Fixing the structure and finishing

The steel is lifted in and fixed. For a concealed stringer, the beam is bolted or anchored along the wall and the wall then built out or plastered over it, leaving only the tread supports projecting. For a cantilever, anchors are drilled and resin-fixed into the wall, sometimes with pull-out tests. For a spine, the beam is fixed at the floor and the landing and levelled. Building Control may inspect at key stages, so installers plan around those visits.

Once the structure is in place and plastering has dried enough, the treads are fitted over the steel, the balustrade is installed and handrails are fixed. The installer checks every rise is consistent and the guarding meets the required height and gap rules.

How to prepare your home

A little preparation makes installation day smoother. Clear the hallway, landing and any cupboard under the old stairs completely, and take down pictures and mirrors near the stairwell. Move valuables and fragile items out of nearby rooms, because drilling and lifting steel can cause vibration. Make sure the installers have clear parking or loading space for the steel and treads, which can be long and heavy; in towns, this may mean arranging a parking bay suspension with the council.

Plan how the household will live during the changeover. If someone has limited mobility, the period without a proper stair may be difficult, so consider staying elsewhere or setting up downstairs for a night or two. Pets are usually happier kept away from the work area. Finally, keep your choices of tread finish, balustrade and handrail confirmed in writing before fabrication, because changes once steel is made are costly.

Agree with the installer how waste will be removed. The old staircase, plasterboard and packaging make a surprising volume, and a skip or waste collection may need booking in advance.

  • Clear the hall, landing and under-stair cupboard
  • Remove pictures and fragile items nearby
  • Arrange parking or loading space for the steel
  • Plan temporary living arrangements if needed
  • Confirm finishes in writing before fabrication

Sign-off and aftercare

Building Control makes a final inspection and, if satisfied, issues a completion certificate. Keep this with your property documents, because buyers' solicitors will ask for it. The wall around the stair can then be decorated, ideally once plaster is fully dry. Aftercare is simple: clean treads with products suited to the finish, re-oil oiled treads as recommended, and check glass clamps and handrail fixings occasionally. We arrange the whole sequence through vetted specialists so each stage is booked in order.

If anything feels loose or a tread moves after installation, contact the installer promptly so fixings can be checked.

Questions people also ask

Can I stay at home while my staircase is replaced?

Usually, yes, but for a day or two upstairs access may be by a temporary stair or ladder, which can be difficult for some households. Talk to the installer about timing and temporary access. Some people arrange to stay elsewhere for the night when the old stair is removed.

How much mess does installing a floating staircase make?

Removing the old stair and plastering creates dust and noise, and drilling anchors is loud. Good installers sheet floors, screen doorways and clean up daily. Expect the hallway to be a work area during the on-site days, and plan decorating after plaster has dried.

Who signs off a floating staircase?

Building Control, either the local authority or a registered building control approver, checks the design and inspects the work, then issues a completion certificate. In Scotland, the local authority grants a building warrant before work and accepts a completion certificate after. Keep the paperwork for when you sell.

Written and checked by the Floating Staircase Builders team. Read our editorial policy.

Get a free floating staircase builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote