Floating Staircase Builders

Ealing · London

Floating Staircase Builders in Southall

Self-builders and renovators in Southall use us to source floating staircase specialists they can rely on.

Book a stair survey in Southall with a local specialist.

Free Floating Staircase Builders quote in Southall

No obligation. We only use your details to reply about this job.

Where we work around Southall

Southall falls within Ealing, London. Postcodes we cover here include UB2, UB1, UB6, UB3 and W7. The same team covers Ealing, Hillingdon, Brentford and Yiewsley too.

Floating Staircase Builders in Southall: local know-how

Work in London is shaped by access: controlled parking zones, red routes, narrow residential streets and the Congestion and ULEZ charges all affect how a job is planned. Victorian and Edwardian homes in Southall often have lath-and-plaster stair walls that must be rebuilt before a floating stair can be fixed.

Detached houses in Southall often have a straight hallway stair ideal for a concealed-stringer floating stair. Driveways in Southall suburbs make it easier to unload long steel sections and glass panels.

Typical costs in Southall

  • Straight concealed-stringer stair, oak treads: £6,500–£12,000. Typical 13-tread domestic stair, steel stringer, solid oak treads and plastering of the wall.
  • Old staircase removal and preparation: £600–£2,000. Stripping out the existing stair and preparing walls, joists and floor for the new structure.
  • Design, calculations and Building Control: £900–£2,500. Survey, drawings, structural calculations and application fees, usually built into the overall quote.

Prices are a guide. Your quote for Southall is a fixed price based on the details you give us. Full price guide.

Floating Staircase Builders questions from Southall

How long does a floating staircase take in Southall?

Allow two to three months from survey to completion in Southall. Design and approval take two to six weeks, fabrication four to eight weeks, and installation two to five days on site.

Can my Southall home take a cantilevered staircase?

It depends on the wall. True cantilevers need solid masonry, usually 215 mm or thicker. Many Southall homes have stud walls, in which case a concealed steel stringer or spine stair is used. An engineer checks during design.

Do you cover areas near Southall?

Yes. We arrange floating staircases in Southall and nearby areas including Hayes and Greenford, through specialists who work across Ealing.

Can you replace my old staircase in Southall?

Yes. The specialist removes your existing stair, prepares walls and joists, then installs the floating stair. In Southall homes this usually means a few days without stairs, so plan accordingly.

What goes on the open side of a floating staircase?

Most floating stairs use a frameless toughened glass balustrade on the open side, fixed into a base channel or with discreet clamps. Steel spindles, tensioned wires or timber slats are alternatives. The guarding must be at least 900 mm high on a private stair and have no gaps a 100 mm sphere could pass through.

Can you have a floating staircase on a stud wall?

Not directly. A standard timber stud wall cannot support cantilevered treads. The wall is either rebuilt in block, reinforced with steel posts, or a concealed steel stringer is designed to carry the load to the floor and upper structure. A central spine stair avoids the need for a structural wall altogether.

Get a free floating staircase builders quote in Southall

Tell us what you need and we'll come back with a clear price.

Request a quote